Relevant Standards
Below we list the relevant standards which will be used to guide the development and deployment of the system. Full compliance with all these standards is not strictly required or sought and different products follow different standards.
Overarching Standards
BS7671 Requirements for Electrical Installations.
- IET Wiring Regulations IEC 61000-6-2:2016.
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
- BS EN 61000-6-3:2007+A1:2011.
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
- BS EN 61140:2016.
Protection against electric shock. Common aspects for installation and equipment.
The Electrical Equipment (Safety) Regulations: 1994.
- The Electromagnetic Compatibility Regulations: 2006.
The Restriction of the Use of Certain Hazardous Substances in
- Electrical and Electronic Equipment Regulations: 2012.
BS7671 Requirements for Electrical Installations.
The Waste Electric and Electronic Equipment (WEEE) Regulations: 2013.
EVSE Standards
- BS 8300:2009+A1:2010.
Design of buildings and their approaches to meet the needs of disabled people. Code of practice. {installation and physical design}
- IEC 68151-1:2017.
Electric vehicle conductive charging system - Part 1: General requirements.
- IEC 61851-21-2:2018.
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems.
- IEC 62196-1:2014.
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements
- IEC 62916-2:2016.
Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
- EN 50620:2017. Electric cables
Charging cables for electric vehicles
- ISO 17409:2015.
Electrically propelled road vehicles – Connection to an external electric power supply – Safety requirements.
- IEC TS 61439-7:2014.
Low-voltage switchgear and controlgear assemblies. Assemblies for specific applications such as marinas, camping sites , market squares, electric vehicles charging stations.
Immersion/Storage Heater Controller
- BS EN 60335-2-73:2003+A2:2009.
Household and similar electrical appliances. Safety. Particular requirements for fixed immersion heaters.
- BS EN 12098-5:2017.
Energy Performance of Buildings. Controls for heating systems. Start-stop schedulers for heating systems. Modules M3-5,6,7,8.
- IEC 60730-2-9:2015.
Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing control.
- IEC 60730-1:2013+AMD1:2015 CSV.
Consolidated version Automatic electrical controls - Part 1: General requirements.